nameplates

Nameplates

Lexicraft Ltd manufactures metal nameplates for product identification, rating plates, branding and promotional purposes.  Materials include aluminium, stainless steel and brass.  Data and graphics are permanent.  Aluminium is anodized and anodically printed.  Stainless Steel is chemically etched (engraved) and filled with paint to reproduce corporate images, Serial Numbers and Bar Codes.

Panels fronts are fabricated in the requisite materials and legends are permanently applied with the same techniques.

Engraved laminates which covers a variety of product names including the more common known Traffolyte are often used for labels, tags, signs or overlays which are in more extreme industrial environments. These are generally a rigid or semi rigid layered material where we mechanically engrave the top surface to expose a different coloured layer thus creating the required image or text.

chemical-etch

Engraved laminates are available in a wide variety of colours for the top layer and the centre layer allowing us to produce a wide range of labels, tags, signs and overlays to suit most client’s requirements.

In addition to engraving laminates we can also engrave and rout aluminium plates and panels some of which may also be Anodized Aluminium with specific data or information.
(see “Anodized Aluminium” below for more detail)

Chemical etching is a process where corrosive chemicals (acid) dissolve away part of the substrate which can be stainless steel or brass to produce the desired text or image.

The chemical etching process begins by printing a reverse image to protect the areas which don’t want to be exposed to the acid and then running the metal through a curtain of acid to etch the un-protected areas.   The numbers of runs and speed the metal is exposed to dictates the depth of the etching from a flash etch through to a deep etch.

automotive-insert

After etching, the printed protection is then removed and where applicable the etched area is filled with paint/ink or left with no infill which is more commonly known as a “natural etch” VIN, Chassis and marker plates are generally chemically etched although this process can be used on more aesthetic and detailed products as a very fine detail can be achieved.

Anodized Aluminium is a process of opening the pores of the aluminium, printing and then sealing the aluminium meaning the print is effectively in the aluminium and not on the surface.

This is achieved by exposing the aluminium to an electrical circuit which makes the surface porous which can then be printed with specialist inks. Once printed the aluminium is then sealed which creates a hard transparent surface and encapsulates the ink.

This process is used for aluminium plates and overlay which are exposed to the elements or extreme environments such as vehicle, machinery or equipment marker plates.

lexicraft-anodised